Breaking in a new baseball Glove

 

Mizuno Youth 09" Ball Glove

You have choosen a youth baseball glove, after you have found the right glove for your child. The next step is to break in that glove so that it is easier to handle and use.

There are several ways to break in a new baseball glove. In fact, if you ask a dozen different Major League players how they do it, you will probably get a dozen different approaches. There are some common practices that you can follow to achieve your ultimate goal.

The first phase is to condition the leather, and this is the step that is in conflict the most among players, but the objective is to soften up the leather so that it is not stiff and hard to squeeze. To start with, you will need a conditioner. Many glove manufacturers will recommend their own brand of oils, but you can use a variety of  products and the cheapest product is a can of plain old Barbasol shaving cream.

Only use this method with steer hide leather gloves, NOT Suede or Vinyl, or Synthetic gloves.

You will need 2 cans of Barbasol, a 5 gallon bucket, and some paper towels. Shake one of the cans of Barbasol shaving cream for a ten seconds then empty its contents into the 5 gallon bucket. Place your new glove into the shaving cream and then take the second can of Barbasol and empty it on top of the glove. Let it sit for a day and all the shaving cream will melt. When the glove is pulled out it will look messy use the paper towels to pat down any excess shaving cream.

You will notice that the shaving cream absorbed into the glove and the laces and this will soften the leather. The next step is to shape the glove. You do this by placing a ball inside the pocket and then wrapping the glove with a couple of rubber bands or shoelaces. Once this is done you can place it out of the way and let it sit in room temperature over night.

The next day, take the rubber bands off  the glove and you want to work the pocket by hitting it with a baseball mallet. I have found that the best product for this is called the Ergo Glove Mallet which sells for about $27 on Amazon. There are some cheaper ones out there but the way they are designed you will be busting up your knuckles on the glove laces because the handle is just not long enough. The Ergo Glove mallet lets your hand be above the glove and avoid the beating on your knuckles. With your baseball mallet, just hit the pocket for about 5 or 10 minutes.

Alternatively, you can just play catch for 5 or 10 minutes but this is assuming your child can catch well and already knows how to control a glove. It’s the best method for older children, but the kids that are 4 – 8 are still learning the mechanics and it will be harder and take longer to break in that pocket. I would recommend using the above mallet, and if not that then a rubber mallet may do the trick as well.
Parents, the point is to work that pocket in the way that a ball will hit it so it is easier for your child to catch. Please DO NOT let your adult hands stretch out the glove and misalign the pocket. Let your child do the pounding with the mallet and they will get a feel for how the ball will hit the glove.

Visit ProHittingCages for gloves that are right for you.